Αντικεραυνικό 2P 20kA 1000V Type 2 DC Φωτοβολταϊκά 64210
-20%
Type 2 PV SPD is a DC surge protector specially designed for photovoltage power supply systems.
Max continuous operating voltage reach DC1500V. These units must be installed in parallel on the DC networks to be protected and provide common and different modes protection.
Its installed location is recommended at both ends of the DC power supply line (solar panel side and inverter/converter side), especially if the line routing is external and long.
Type 2 SPDs protect against indirect lightning strikes, which are characterized by 8/20 μs waveforms. An 8/20 μs waveform means that the strike has an 8 μs rise time and a duration to one-half peak of 20 μs.
Max continuous operating voltage reach DC1500V. These units must be installed in parallel on the DC networks to be protected and provide common and different modes protection.
Its installed location is recommended at both ends of the DC power supply line (solar panel side and inverter/converter side), especially if the line routing is external and long.
Type 2 SPDs protect against indirect lightning strikes, which are characterized by 8/20 μs waveforms. An 8/20 μs waveform means that the strike has an 8 μs rise time and a duration to one-half peak of 20 μs.
Technical data
- SPD classification according to IEC/EN61643-31: T2
- Max. continuous operating a.c.voltage Ucpv: 2P 1000V
- Nominal discharge current (8/20μs) In: 20kA
- Maximum discharge current (8/20μs) Imax: 40kA
- Voltage protection level DC+/DV-to PE: 2P 1000V ≤ 4kV
- Operating temperature range (Tu): -40º~80º
- Operating State/Fault Indication: Green/Red
- Cross-section area (Min.): 4 mm²
- Cross-section area (Max.): 35 mm²
- Enclosure material: Thermal Plastic UL94-V0
- Ingress Protection: IP20